Regulators
The right regulator for your application
All-in-gas holds expert knowledge about all types of gases. We are happy to recommend the most suitable regulator for your application. In order to find the right regulator for your needs, you may consider the following:
- reactive or corrosive gases generally require a stainless steel regulator
- for non-reactive gases, a brass regulator is sufficient
- if you have an ever constant flow rate, a regulator with a preset extraction rate is just right for you
- should the flow rate vary, we recommend you a regulator with adjustable extraction rates.
WARNING
The 12L ALLCAN does not have an EXTERNAL THREAD TYPE A, the 34L, 60L and 112L ALLCANs have an INTERNAL THREAD TYPE B.
REGULATORS WITH PRESET EXTRACTION RATE
AIG-100
TYP B
- compatible with 34 l, 60 l, 112 l ALLCAN / C10 Gewinde
- pressure gauge
- fixed flowrate: 0,3 l/min, 0,5 l/min, 1,0 l/min,1,5 l/min, 2,0 l/min, 2,5 l/min, 3,0 l/min
AIG-113
The AIG-113 regulator, also known as the "trigger", is used to quickly release a small amount of gas. Pressing the trigger activates the regulator and delivers gas at a specific preset flow rate. The trigger regulator is a single stage flow control device.
All important data at a glance
- compatible with 34 l, 60 l, 112 l ALLCAN / C10 Gewinde
- Regulator opens and closes by the trigger
- Pressure display to check the filling level
REGULATORS WITH ADJUSTABLE EXTRACTION RATE
AIG-101
- TYP A - compatible with 12 l ALLCAN
- flowrate meter
- nickel-plated brass
AIG-104
TYP B
- compatible with 34 l, 60 l, 112 l ALLCAN / C10 thread
- pressure gauge
- adjustable from 0,5 l/min - 5,0 l/min in 0,5er steps
AIG-105
TYP A / B
- compatible with 12 l, 34 l, 60 l, 112 l ALLCAN / Version A for 12 l , Version B for 34 l -112 l
- pressure gauge
- adjustable from 0,5 l/min - 1,5 l/min
- only available in nickel-plated brass, but suitable for H2S und SO2
AIG-110
TYP B
-
passt auf 34 l, 60 l, 112 l ALLCAN / C10 Gewinde
-
Druckanzeige zur Kontrolle des Füllstandes
-
Ausgangsdruck regelbar, 0-6 bar
Der AIG-110 ist dafür konzipiert, den Ausgangsdruck hinter dem Regler zu kontrollieren;
Der Ausgangsdruck lässt sich stufenlos von 0-6 bar einstellen und bietet somit eine Alternative zur reinen Durchfluss (l/min) der anderen Regler.
Compatibility of the materials:
| Gas: | REGULATOR: Nickel-plated brass | REGULATOR: Stainless steel |
| Non-reactive | suitable | suitable |
| H2S / SO2 | suitable | suitable |
| NO / NO2 | not recommended | suitable |
| CI2 / HCI | not suitable | suitable |
| NH3 | not suitable | suitable |
| PH3 / SIH4 | not suitable | suitable |
| HCN | not suitable | suitable |
